Thanks Mike!
-------------------------
Rust Coating
The underside is coated with a nice thick application.
-------------------------
AFTER: Left front wheel well.
............................................
............................................
Before Rust Coating
The ties, wheel well liners, under-body shields, tail lights are removed for better access to the undercarriage.
-------------------------
Rustproofing being applied inside the engine hood.
---------------------------
After Rust Coating
-------------------------
Before Rust Coating
All the areas that are not to be coated are covered with tin foil and masking paper.
-------------------------
After Rust Coating
Owner: Mike Willert
Eau Claire, WI
2016 Honda CRV - AWD
Miles:000,499
-------------------------
Before Rust Coating
Rust Coaters LLC
BY APPOINTMENT: 3005 Melby Street #4 - Eau Claire, WI 54703
CALL 9am - 9pm -7 days a week
Phone: 715-590-4832
-------------------------
Rustproofing being applied inside the rear gate.
-------------------------
BEFORE: Rear axle.
-------------------------
The parts that were removed for better access are now reinstalled.
-------------------------
The Rust Proofing and Rust Coating Process
-------------------------
Finally, the outside of the vehicle is washed to remove any over-spray from the outside body.
-------------------------
Before Rust Coating
A degreaser - salt neutralizer is applied.
-------------------------
Before Rust Coating
The parts that were removed & the entire bottom are steam-cleaned, the hot water pressure washed & then flushed with hot water.
-------------------------
Before and After
Here are some BEFORE & AFTER Close ups that show what the Rust Coating looks like.
-----------------------
Before Rust Coating
World Class Rust Proofing
-------------------------
BEFORE: Left hand floor area.
-------------------------
Happy Customer - who now has a vehicle that will last him a long time!
-------------------------
AFTER: Rear axle.
-------------------------
Rust Coating being applied to the rear inner wheel well gap.
-------------------------
Rustproofing being applied to the doors.
------------------------------
-------------------------
NOTE: The next series of photos show SOME if the inner panels of the vehicle being rustproofed.
Our rustproofing has the ability to creep into cavities and flow upward, sideways and downward into welds and seams.
-------------------------
Before Rust Coating
A masking spray is applied over the outer surfaces of the vehicle to keep the rust Coating and rust proofing materials from sticking to the glass, trim and paint finish.
-------------------------
AFTER: Left hand floor area.
AMBER
'Auto Undercoating' & 'Auto Rustproofing'
Review
-------------------------
BEFORE: Right rear wheel well.
------------------------
After Rust Coating
------------------------
Before Undercoating
-------------------------
BEFORE: Left front wheel well.
-------------------------
AFTER: Right rear wheel well.
--------------------------
Before Rust Coating
------------------------
After Rust Coating
-------------------------
Before Rust Coating
Any pockets of water are blasted out with compressed air and large fans are setup to aid the drying process.